New Cars
car&bike Team
Oct 29, 2018, 11:44 PM
If you are looking to purchase a new Volvo XC90, you can get a cash discount of up to Rs. 8 lakh on the SUV.
1 Min
car&bike Team | Oct 29, 2018Diwali 2018: Skoda Offers Benefits Of Up To Rs. 1.5 LakhSkoda is offering cash benefits of up to Rs. 1 lakh on the Kodiaq and the base model of the Superb.1 min read
car&bike Team | Oct 29, 20182019 Jaguar F-Pace Petrol Launched In India; Priced At Rs. 63.17 LakhThe petrol version of the F-Pace comes powered by a 2-litre Ingenium engine which churns out 247 bhp, while the torque figures stand at 365Nm. The F-Pace omes with an 8-speed automatic transmission which powers all four wheels2 mins read
Kingshuk Dutta | Oct 28, 2018Exclusive: 2018 Mercedes-Benz C-Class Cabriolet Facelift Launched In India; Priced At Rs. 65.25 LakhJust a month after the C-Class Facelift launch, the 2018 Mercedes-Benz C-Class Cabriolet is now on sale in India as well, with it being priced at Rs. 65.25 lakh (ex-showroom, Delhi).1 min read
car&bike Team | Feb 2, 2024Honda Car Will Roll Out BS6 Compliant Car Ahead Of The April 2020 DeadlineThe company has shared that its entire product line-up will comply with the upcoming BS6 standards at least four months prior to the norms kicking in. On the side lines of the 4th edition of the CII Smart Manufacturing Summit held in Delhi today, Mukesh Manocha, Assistant General Manager, Welding Division, Honda Cars India, spoke to carandbike about the Japanese carmaker's preparations to meet the BSVI norms and said, "We will be ready much before the BSVI norms are regulated throughout the country." When asked about a specific timeline, Manocha said, "I will not give you the exact month now but yes at least four months before the BS6 norms kick in."2 mins read
car&bike Team | Oct 27, 2018Honda Car India Waves Into The Industry 4.0 Agenda With 3D PrintingThe Japanese carmaker has already started using the 3D Printing technology in the welding shop of both its manufacturing units in India and is working to use it across its manufacturing divisions and assembly lines. On the side lines of the 4th edition of the CII Smart Manufacturing Summit held in Delhi today, Mukesh Manocha, Assistant General Manager, Welding Division, Honda Cars India told carandbike, "Our welding shop has already started using the 3D printing technology and sooner than later we will expand its use across our manufacturing facility."1 min read
car&bike Team | Oct 26, 2018Tata Tiago JTP, Tigor JTP Launched In India; Prices Start From Rs. 6.39 LakhThe Tiago and Tigor JTP target the younger, dynamic and aspirational set of buyers. Both the cars come with enhancements to the exterior. They come with an aggressive front bumper with large trapezoidal lower grille.1 min read
car&bike Team | Oct 26, 20182019 Volkswagen T-Cross RevealedThe Volkswagen T-Cross is also the automaker's first-ever small SUV and will be competing against the likes of the Hyundai Creta, Nissan Kicks, Renault Captur among others in the segment.1 min read
car&bike Team | Oct 25, 2018Exclusive: Maruti Suzuki Omni To Be DiscontinuedThe design of the Maruti Suzuki Omni being a flat front lacks the structural integrity to conform to the new crash norms. It cannot be fitted with crumple zones to absorb the impact in case of a collision. Other products under scanner are the Eeco Van and the entry-level Alto 800 hatchback. Maruti Suzuki is maintaining that its team is working on their design and are trying to make sure the carscomply with the upcoming safety standards. "It is not that the Eeco and Alto 800 cannot be made ready to meet the safety standards. They will require extensive development and we are trying to ready them for the upcoming safety norms," added Bhargava.1 min read
